|
|
|
Input Modules
Each module is equipped to allow Adjustment of Input Sensibility,
an Input Switch, a High and Low Tones Section to allow special
tibre processing, Equalizing Control of the two Left and Right
Channels, Address Buttons for the input signals along the
two separate stereophonic outputs PROGRAM and UTILITY, a Switch
to Insert Pre-Listening (with Led Display) and Electronic
Start (optional).
THE MONO MICRO-LINE MODULE
is equipped with two types of Monophonic Inputs: one an Equalized
Monophonic Transformer Input, the other with Line Sensitivity.
THE STEREO PHONO-LINE MODULE has two Stereophonic
Input: one with Phono Sensitivity, the other with Line Sensitivity.
THE STEREO LINE-LINE MODULE is equipped
with two Stereo Inputs with Line Sensitivity.
|
 |
 |
Telephone Modules
The Telephone Modules is a high-quality Telephone Hybrid,
which makes it possible to achieve the Maximum Audio quality
from the telephone line, even when connecting two lines on
a conference.
A Filter against Lightning and radio Frequencies protects
the Telephone Input; it is balanced and has Galvanic Ground
Insulation.
The Line Compensator adjusts the module capacity to the line
features, thus achieving Maximum Telephone and at the same
time reducing the risk of the Larsen phenomenon.
The level of the incoming CALL can be adjusted and a Band-Pass
Filter reduces telephone line Interference. A Red Led warns
the incoming calls and it's possible to hang Up the Line by
a button.
The STAND-BY-BUTTON makes it possible to hold the line excluding
the caller; thus, with two telephone modules, the DJ (for
example in live game shows) can speak reservedly in private
mode with one caller without the other hearing.
All conversations with the listener, even reserved, are made
through the Microphone and Headphones of the Console; thus
there is no need to use the telephone set.
|
 |
Master Modules
The Master Module has the task of summing signals from the
input modules and sent them to the Program and Utility outputs.
It has a TALK BACK OUTPUT used for service communications,
and a RECORDING OUTPUT with level control. The contents of
the Program or Utility Outputs are addressed to the Vu Meter
using the Select Button.
Monitor Modules
The Monitor Module Amplifies the Power of signals arriving
from the input modules, master modules and two external sources
(for example FM receivers).
It contains 2 Separate HEADPHONE OUTPUTS (Regie and Animator),
the CONTROL ROOM OUTPUT for room monitoring, and the CONTROL
STUDIO OUTPUT.
Vu Meter Modules
The Vu Meter Module Reveals the Peak Value through two instruments
set in dB. Two Peak Detector Lights signal when the level
is Over Range.
|
 |
Accessories
10 + 10 WATT AMPLIFIER
AUTOSTART provides the contact to automatically start the decks
and turn on the lighted room signals. It consists of a Power Unit
with 3 or 10 relays, piloted by two types or Control Modules (mounted
directly on the Micro-Line, Phono-Line or Line-Line Module): the
Intermittent Zero Start which sends a one-second closing command,
and the Stable Zero Start which commands a stable closing.
| |
Audio
Products 
