| INPUT / OUTPUT SPECIFICATIONS
Mic Inputs
General
| Input configuration |
Transformer Balanced |
| Input Impedance |
200 Ohm |
| Sensitivity Level Range |
Adjustable from –70 ÷-40 dBu (Trimmer adj.) |
| Input Level Range |
±12 dBu (Digital adj. step 0,5 dB) |
| Maximum Input Level |
- 30 dBu |
| Phantom Supply |
42 Vdc selectable, with 3k3 c.c. protection |
| 100 mm Fader control |
VCA Digital controlled |
Insert section:
| Insert Output configuration |
Unbalanced |
| Insert Output impedance |
100 Ohm |
| Insert Output level |
0 dBu |
| Insert Input configuration |
Unbalanced |
| Insert Input impedance |
10 KOhm |
| Insert Input level |
0 dBu |
DJ Controls:
| external DJ Slider control |
Available |
| DJ Talk back |
Available |
| In Start / Stop /Cough control |
Available |
| Out Start / Stop Control |
Available |
| Connector |
D-Sub 15 Pole Female |
Line Inputs
| Input configuration |
Electronically balanced |
| Input Impedance |
10 K Ohm (600 Ohm wired selectable) |
| Input Level Range |
±12 dBu (Digital adj. step 0,5 dB) |
| Headroom |
+ 18 dBu |
| 100 mm Fader control |
VCA Digital controlled |
| Connector |
DSUB 15 pole female |
Digital Controls:
| In Start / Stop |
Available |
| Out Start / Stop Control |
Available |
DIGITAL INPUT
| Input configuration |
AES/EBU, IEC958,S/PDIF & EIAJ CP340/1201
Professional and consumer |
| Sample Rate |
Automatic 32, 44.1, 48, 96 KHz converter |
| 100 mm Fader control |
VCA Digital controlled |
| Connector |
DSUB 15 pole female Optical |
TELEPHONE
HYBRID MODULE
| Input configuration |
Opto-coupled |
| Input impedance |
600 Ohm Bal |
| Line Compensation |
Automatically (max 5 Km) |
| Echo canceller |
Digital (optional) |
| Tx Level |
0 or + 3 dBu dip switch selectable |
| Rx Level Range |
±12 dBu (Digital adj. step 0,5 dB) |
| Frequency response |
300 Hz ÷ 3400 Hz (-2 dB) without Echocanc
300 Hz ÷ 3400 Hz (-1.5 dB) with Echocanc |
| Distortion |
< 1.5 % |
| Noise |
-60 dB. |
| Cross-talk |
Digitally cancelled |
Digital Controls:
| In Start / Stop |
Available |
| Out Start / Stop |
Available |
| In Lock/ Meeting |
Available |
| Out Call / Lock |
Available |
EXTERNAL INPUT
| Input configuration |
Electronically balanced |
| Input Impedance |
10 K Ohm(600 Ohm wired selectable) |
| Input Level Range |
±12 dBu (Digital adj. step 0,5 dB) |
| Headroom |
+ 18 dBu |
| Connector |
DSUB 9 pole female |
ANALOG OUTPUTS
| Output configuration |
Electronically balanced |
| Output Impedance |
100 Ohm |
PGM Output Level Range
Connector |
-2 ÷ +13 dBu (1 dB step dip switch selectable)
DSUB 9 pole female |
UTL Output Level Range
Connector |
-2 ÷ +13 dBu (1 dB step dip switch selectable)
DSUB 9 pole female |
C Room Mut.Output LevR
Connector |
- 
÷ +12 dBu
DSUB 9 pole female |
C Room Mut.Output LevR
Connector |
-
÷ +12 dBu
DSUB 9 pole female |
C Studio no Mut.Output LevR
Connector |
-2 ÷ +13 dBu (1 dB step dip switch selectable)
DSUB 9 pole female |
DIGITAL OUTPUTS
| Output configuration |
AES/EBU, IEC958,S/PDIF & EIAJ CP340/1201
Professional and consumer |
| Sample Rate |
Automatic 32, 44.1, 48, 96 KHz converter |
| Connector |
DSUB 15 pole female Optical |
HEAD PHONES (C.Room no Muted):
| Configuration Type |
Stereo unbalanced |
| Output Impedance |
50 Ohm |
| Connector |
JACK 6 mm |
Digital Controls:
| Tally 1 OUT |
Available |
| Connector |
JACK 6 mm |
LOGIC INPUT
| Configuration |
Opto-coupled (with internally 330 Ohm protection) |
| Typical Voltage input |
5 Vdc (for 10 mA input) |
| Max Reverse Voltage |
5 Vdc |
| Connector |
DSUB 15 pole female |
LOGIC OUTPUT
| Configuration |
Optic solid state relay |
| Max Voltage |
50 Vdc/ac |
| Max Current |
100 mA |
| Connector |
DSUB 15 pole female |
External
Control
Studio Fader
|
 |
From Tally Out
it’s possible to control the AEV ON AIR Light
|
|
GENERAL SPECIFICATIONS
FREQUENCY RESPONSE
Microphone Input
to program output
|
20 Hz ÷ 20 KHz ±1
dB (50 Hz ÷ 20 KHz ± 0.3 dB) |
Line Input
to program output
|
30 Hz ÷ 20 KHz ±0.3
dB (20 Hz ÷ 20 KHz ± 1 dB) |
NOISE
Micro Amplifier
|
-130 dBu RMS equivalent input
noise, 200 ohm source,
20 KHz bandwidth
|
Line Amplifier
|
-120 dBu RMS equivalent input
noise, 600 ohm source,
20 KHz bandwidth
|
Output Noise with one Microphone
channel ON, fader at 0 dB, input sensitivity at –40
dB, 200 ohm source:
|
better than
|
-84 dB (Wide 10 Hz / 23 KHz)
-72 dB (CCIR Wght) |
Output Noise with:
one Line channel ON, fader at 0 dB, input sensitivity at 0
dB
|
better than
|
-86 dB (Wide 10 Hz / 23 KHz)
-75 dB (CCIR Wght) |
Output Noise with:
all input channel OFF
|
better than
|
-89 dB (Wide 10 Hz / 23 KHz)
-78 dB (CCIR Wght) |
DISTORTION T.H.D.
Microphone Input to program output
|
0.018 % |
Line Input to program output
|
0.007 % |
ASSIGN ISOLATION
20 KHz
|
better than -85 dB |
CROSSTALK L/R
20 KHz
|
better than -66 dB |
CROSSTALK PGM/ Other OUT
CMRR ( Line Input )
GENERAL DATA
Power Supply
|
115 / 230 VAC 50 – 60 Hz |
Operating Temperature
|
0 ÷ 50 °C |
|
Audio
Products 
